FTU A Little Bit Of Spring Banner Set Tutorial

FTU A Little Bit Of Spring Banner Set Tutorial

Written June 29,2019

This tut is intended for those that have a working knowledge of PSP 

This tutorial was written in PSP X but can be done in any version.

My tutorials are only meant as a guide , if u wish to use a different tube or change the colors etc , then please feel free to do so.I love to see what all others can create with my stuff.

Supplies Needed:

PSP

Eye Candy Gradient Glow (I am using 3.1 version)

Font of Choice I used 

You can find it Here!

Tube of your choice - I am using the beautiful artwork of ""

You need a license to use his/her work, please do not use his/her work without a proper license.. 

U can purchase it Here! 

Scrapkit "A Little Bit Of Spring" by MizTeeques

You can find it Here! 

You can check out the rest of her wonderful blog Here!

My wordart Here!!

 just right click and save as a PNG file.

Drop Shadow (this is the drop shadow used throughout tutorial)

V = 1

H = 1

Opacity = 50

Blur = 1.00

Color = Black

Let's Get Started!!!

Profile New canvas 800 x 800 (We'll resize to 600 x 600 at end)

Banner New canvas 760 x 270  

We are working on the profile tag first.. 

New Canvas 800 x 800 

Copy & paste El 28,resize 80%,rotate left 15 .with magic wand click inside to select, modify >expand by 5,new raster layer,move layer below the frame layer, copy & paste paper 15 into selection..Keep selected.

Copy & paste close up of tube,place,resize 60% or to your liking and place, selections > invert, delete. Deselect. 

Copy & paste El 1,resize 60%,rotate 15 left,sharpen and add drop shadow.

Copy & paste El 31,place,resize 60%,rotate 15 left,sharpen and add drop shadow. Duplicate,mirror,merge layer down,move this layer below previous layer.

Copy & paste El 21,resize 30%,place,sharpen and add drop shadow.

Copy & paste El 26,resize 50%,place,sharpen and add drop shadow.

Copy & paste El 8,resize 45%,place,sharpen and add drop shadow.

Copy & paste El 20,resize 35%,place,sharpen and add drop shadow.

Copy & paste El 13,resize 45%,place,sharpen and add drop shadow.

Copy & paste El 51,resize 130%,move this layer to bottom.

Now for the background layer,new raster layer,move to bottom,select all and copy & paste paper 18 into selection. Deselect.

Now on Banner Canvas do the same as above for the 2 bottom layers,the background and the Element 51.

Now go back to Profile Canvas and turn visibility off on both bottom layers,then back to the Banner Canvas and paste as new layer,place to liking,merge visible.

add any other elements that u wish .

Add any kind of border you wish.

resize to 600 x 600 or to liking...I always resize mine before adding copyright to keep it from being blury.

Please remember to add all proper © copyright information on both tags.

Add ur name...

Set background to #8c7dcc type your name.

Save as PNG file...

Hope u enjoyed my tutorial

I would love to see your results, Please post them here or 

u can email them to Here!  with subject 

line "Tut Results"!!! 

FTU Vintage Feeling Banner Set Tutorial

FTU Vintage Feeling Banner Set Tutorial

Written June 27,2019

This tut is intended for those that have a working knowledge of PSP 

This tutorial was written in PSP X but can be done in any version.

My tutorials are only meant as a guide,if u wish to use a different tube or change the colors etc,then please feel free to do so.I love to see what all others can create.

Supplies Needed:

PSP

Eye Candy Gradient Glow (I am using 3.1 version)

Font of Choice I used  Vanilla Mermaid

You can find it Here!

Tube of your choice - I am using the beautiful artwork of "Verymany"

You need a license to use his/her work, please do not use his/her work without a proper license.. 

U can purchase it Here! 

Scrapkit "Vintage Feeling" by Honored Scraps

You can find it Here! 

You can check out the rest of her wonderful blog  Here!

Mask "Mask 162" by MizTeeques

you can get it Here!

You can check out the rest of her wonderful blog Here!

Vintage Feeling Wordart by me ,just right click and save as a PNG file...

Drop Shadow (this is the drop shadow used throughout tutorial)

V = 1

H = 1

Opacity = 50

Blur = 1.00

Color = Black

Let's Get Started!!!

Profile New canvas 800 x 800 (We'll resize to 600 x 600 at end)

Banner New canvas 760 x 270  

We are working on the profile tag first.. 

New Canvas 800 x 800 

Copy & paste Frame 4,resize 80%,with magic wand click inside to 

select, modify >expand by 5,new raster layer,move layer below the frame layer, copy & paste paper 6 into selection..Keep selected.

Copy & paste close up of your tube,resize to your liking and place, selections >invert,delete.Deselect. Duplicate tube and mirror,merge layer down and set opacity to screen. 

Copy & paste El 07,place and add drop shadow.

Copy & paste El 25,place and add drop shadow.

Copy & paste El 01,resize 90% ,place and add drop shadow,duplicate,with mover tool move to left side ,duplicate and move to right side and down some ,see my tag for placement. DO NOT MERGE. 

Copy & paste El 10,resize 40%,move this layer below last layer and place,sharpen and add drop shadow,Duplicate,move this layer to the top layer.

Copy & paste El 20,resize 60%,sharpen and add drop shadow,duplicate ,mirror and place ,merge layer down.

Now for the background and mask layer,New Raster Layer,select all ,copy & paste paper 6 into selection,keep selected,new raster layer, now copy & paste paper 1 into selection, deselect.

Now to apply mask on top paper layer,go to Image > New Mask Layer,From Image,choose your mask,click ok,then on layers palette,merge group.Resized 130%.

Now on Banner Canvas do the same as above for the background and mask layers.

Now go back to Profile Canvas and turn visibility off on both bottom layers,then back to the Banner Canvas and paste as new layer,place to liking,merge visible.

Since you can not see the bottom I copied and pasted the following elements.

El 01,07 & 10,resize to your liking,place,sharpen and add drop shadow.

add any other elements that u wish .

resize to 600 x 600 or to liking...I always resize mine before adding copyright to keep it from being blury.

Please remember to add all proper © copyright information on both tags.

Add ur name...

Save as PNG file...

Hope u enjoyed my tutorial

I would love to see your results, Please post them here or 

u can email them to Here! with subject 

line "Tut Results"!!! 

FTU Friendship Blooms Banner Set Tutorial

FTU Friendship Blooms Banner Set Tutorial

Written June 26,2019

This tut is intended for those that have a working knowledge of PSP 

This tutorial was written in PSP X but can be done in any version.

My tutorials are only meant as a guide , if u wish to use a different tube or change the colors etc , then please feel free to do so.I love to see what all others can create with my stuff.

Supplies Needed:

PSP

Eye Candy Gradient Glow (I am using 3.1 version)

Font of Choice I used Vanilla Mermaid

You can find it Here! 

Tube of your choice - I am using the beautiful artwork of "Verymany"

You need a license to use his/her work, please do not use his/her work without a proper license.. 

U can purchase it Here! 

Scrapkit "Friendship Blooms" by MizTeeques

You can get it Here!  (scroll down to Row 14 )

You can check out the rest of her wonderful blog Here!

Mask "Mask_Viv_0050" by Vivienne's Paintbox

You can get it Here!

You can check out the rest of her wonderful blog Here!

Drop Shadow (this is the drop shadow used throughout tutorial)

V = 1

H = 1

Opacity = 50

Blur = 1.00

Color = Black

Let's Get Started!!!

Profile New canvas 800 x 800 (We'll resize to 600 x 600 at end)

Banner New canvas 760 x 270  

We are working on the profile tag first.. 

New Canvas 800 x 800 

Copy & paste El 55,resize 110%,with selection tool set to eclipse,start in middle of frame and go out until all is selected,

modify >expand by 5,new raster layer,move layer below the frame layer, copy & paste paper 4 into selection..Keep selected.

Copy & paste close up tube,resize to your liking and place, selections > invert,delete. deselect. 

Copy & paste El 48,place,sharpen and add drop shadow.

Copy & paste El 11,resize 30%,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 8,resize 35%,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 2,resize 30%,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 1,resize 40%,sharpen and add drop shadow.

Copy & paste tube,resize 70% or to your liking,place,sharpen and add drop shadow.

Copy & paste El 45,resize 30%,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 44,resize 30%,sharpen and add drop shadow,move layer below tube layer.

Copy & paste El 43,resize 30%,sharpen and add drop shadow.

Copy & paste El 42,resize 20%,sharpen and add drop shadow.

Copy & paste El WA 1,resize 50%,place,I added a gradient glow,white, size 4.

Copy & paste El 37,resize 50%,sharpen and add drop shadow,move layer below the tea cup.

Now for the background and mask layer,New Raster Layer,select all ,copy & paste paper 6 into selection,keep selected,new raster layer, now copy & paste paper 18 into selection, deselect.

Now to apply mask on top paper layer,go to Image > New Mask Layer,From Image,choose your mask,click ok,then on layers palette,merge group,resize 110%,duplicate mask,mirror,merge layer down.

Now on Banner Canvas do the same as above for the background and mask layers.

Now go back to Profile Canvas and turn visibility off on both bottom layers,then back to the Banner Canvas and paste as new layer,place to liking,merge visible.

To add frames,select all,add new raster layer,go to selections,contract 10,invert,copy & paste paper 17 into selection,

apply inner bevel using the following settings.

add any other elements that u wish .

resize to 600 x 600 or to liking...I always resize mine before adding copyright to keep it from being blury.

Please remember to add all proper © copyright information on both tags.

Add ur name... I used paper 17 for font.

Save as PNG file...

Hope u enjoyed my tutorial

I would love to see your results, Please post them here or 

u can email them to Here!  with subject 

line "Tut Results"!!! 

FTU Minutes In Life Snags

Here are a few FTU Snags...

FTU Canada Day Banner Set Tutorial

FTU Canada Day Banner Set Tutorial

Written June 26,2019

This tut is intended for those that have a working knowledge of PSP 

This tutorial was written in PSP X but can be done in any version.

My tutorials are only meant as a guide , if u wish to use a different tube or change the colors etc , then please feel free to do so.I love to see what all others can create with my stuff.

Supplies Needed:

PSP

Eye Candy Gradient Glow (I am using 3.1 version)

Font of Choice I used 

You can find it Here!

Foto Frame (AAA Frames)You can get it Here!

Tube of your choice - I am using the beautiful artwork of "Laguna" at PFD

You need a license to use his/her work, please do not use his/her work without a proper license.. 

U can purchase it Here!

Scrapkit "Canada Day" by Mizteeques

You can get it Here!

You can check out the rest of her wonderful blog Here!

Mask "mskW2" by Wendy

You can get it Here! 

You can check out the rest of her wonderful blog Here!

Drop Shadow (this is the drop shadow used throughout tutorial)

V = 1

H = 1

Opacity = 50

Blur = 1.00

Color = Black

Let's Get Started!!!

Profile New canvas 800 x 800 (We'll resize to 600 x 600 at end)

Banner New canvas 760 x 270  

We are working on the profile tag first.. 

New Canvas 800 x 800 

Copy & paste Frame 1,resize 80%,with magic wand click inside to 

select, modify >expand by 5,new raster layer,move layer below the frame layer, copy & paste paper 1 into selection..Keep selected.

Copy & paste close up of tube,resize to your liking and place,duplicate,move this layer above frame layer,selections > invert,with eraser tool carefully erase parts of tube that you do not hang out of frame.

Now go to bottom tube layer and with eraser tool,erase parts of tube you do not want to show.

Copy & paste El 1,resize 60%,place,sharpen and add drop shadow.

Copy & paste El 16,resize 50%,place,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 23,resize 30%,place,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 21,resize 30%,place,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 20,resize 30%,place,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 14,resize 50%,place,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 37,resize 50%,place,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 33,resize 30%,place,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 32,resize 30%,place,sharpen and add drop shadow,duplicate,mirror,merge layer down.

Copy & paste El 13,place on right side,duplicate,mirror,merge layer down.

Copy & paste El 18,resize 30%,place,sharpen and add drop shadow.

Copy & paste El 39,resize 40%,place,sharpen and add drop shadow.

Copy & paste El 36,resize 60%,place,sharpen and add drop shadow.

Copy & paste El 30,resize 60%,place,sharpen and add drop shadow.

Copy & paste Select all ,copy & paste paper 1 into selection,keep selected,new raster layer, now copy & paste paper 7 into selection, deselect.

Now to apply mask on top paper layer,with this one we are gonna have to take off the credit so pull up mask,new raster layer,send to bottom,fill with black,on top layer with eraser tool carefully erase credit up top.then merge layers.

Now go to Image > New Mask Layer,From Image,choose your mask,click ok,then on layers palette,merge group.

add any other elements that u wish .

Now on Banner Canvas do the same as above for the background and mask layers.

Now go back to Profile Canvas and turn visibility off on both bottom layers,then back to the Banner Canvas and paste as new layer,place to liking,merge visible. 

Copy & paste El 30,resize 35%,place,sharpen and drop shadow.

For the Profile Canvas 

resize to 600 x 600 or to liking...I always resize mine before adding copyright to keep it from being blury.

Please remember to add all proper © copyright information on both tags.

Add ur name...

Set background to

Save as PNG file...

Hope u enjoyed my tutorial

I would love to see your results, Please post them here or 

u can email them to Here! with subject 

line "Tut Results"!!! 

FTU London Town Banner Set Tutorial

FTU London Town Banner Set Tutorial

Written June 26,2019

This tut is intended for those that have a working knowledge of PSP 

This tutorial was written in PSP X but can be done in any version.

My tutorials are only meant as a guide , if u wish to use a different tube or change the colors etc , then please feel free to do so.I love to see what all others can create with my stuff.

Supplies Needed:

PSP

Eye Candy Gradient Glow (I am using 3.1 version)

Font of Choice I used Beauty Bright 

You can find it Here!

Frames from me ,just right click and save

Tube of your choice - I am using the beautiful artwork of "Verymany"

You need a license to use his/her work, please do not use his/her work without a proper license.. 

U can purchase it Here! 

Scrapkit "London Town" by Mizteeques

You can get it Here!

You can check out the rest of her wonderful blog Here!

Mask "173" by MizTeeques 

You can get it Here!

You can check out the rest of her wonderful blog Here!

My Wordart Right click and save as PNG file..

Drop Shadow (this is the drop shadow used throughout tutorial)

V = 1

H = 1

Opacity = 50

Blur = 1.00

Color = Black

Let's Get Started!!!

Profile New canvas 800 x 800 (We'll resize to 600 x 600 at end)

Banner New canvas 760 x 270  

We are working on the profile tag first.. 

New Canvas 800 x 800 

Copy & paste Frame 2,resize 60%,image rotate to 15 left and move to upper left,Duplicate,mirror,move down to bottom right,see mine for placement,merge layer down,with magic wand click inside each frame to select,modify >expand by 5 new raster layer,move layer below the frame layer, copy & paste paper 10 into selection..Keep selected.

Copy & paste close up of tube as a new layer,place in top frame,selections >invert, delete,deselect. Lower opacity to liking,copy and paste tube again and mirror,now with magic wand select bottom frame only ,place tube and lower opacity to liking.

Deselect..

Copy & paste El 23,move layer under the frame and tubes layers,duplicate and move up to right ,merge layer down.

Copy & paste El 17,place,sharpen and drop shadow,move layer below the frame layers.

Copy & paste Tube,resize 70%,place,sharpen and drop shadow.

Copy & paste El 14,resize 40%,place,sharpen and drop shadow.

Copy & paste El 37,resize 40%,place,sharpen and drop shadow.

Copy & paste El 17,resize 40%,place,sharpen and drop shadow.

Copy & paste El 11,resize 40%,place,sharpen and drop shadow.

Copy & paste El 2,resize 40%,place,sharpen and drop shadow.

Copy & paste El 3,place,sharpen and drop shadow.

Copy & paste El 8,resize 40%,place,sharpen and drop shadow.

Copy & paste Select all ,copy & paste paper 2 into selection,keep selected,new raster layer, now copy & paste paper 8 into selection, deselect.

Now to apply mask on top paper layer,go to Image > New Mask Layer,From Image,choose your mask,click ok,then on layers palette,merge group.I resize mine to 130% to make the mask layer bigger.

Copy & paste the Banner Frame on the Banner tag,merge layer down.

Copy & paste the Profile Frame on the Banner tag,merge layer down.

add any other elements that u wish .

Now on Banner Canvas do the same as above for the background and mask layers.


Now go back to Profile Canvas and turn visibility off on both bottom layers,then back to the Banner Canvas and paste as new layer,place to liking,merge visible.

resize to 600 x 600 or to liking...I always resize mine before adding copyright to keep it from being blury.

Please remember to add all proper © copyright information on both tags.

Add ur name...

Save as PNG file...

Hope u enjoyed my tutorial

I would love to see your results, Please post them here or 

u can email them to Here!  with subject 

line "Tut Results"!!!